Protection of all your circuits
Element 82 have a full selection of circuit breakers in all the different formats like panel or surface mount. Mini series, mid series or anything up to 48 volt in IP67 at 250A. NH Fuse holders and fuses to 1500VDC for solar panel installations. MCCB for battery disconnect isolators. Along with IP enclosures from 2 way to 15 way for our DC MCB circuit breakers. Midi, Maxi and Mega fuses, fuse holders, inline holders and distribution blocks and busbars for battery bank parallel connections and Class-T (JJN) fuses.
- Description
- Specifications
- Post a comment
POWERTECTOR
LOW VOLTAGE DISCONNECT SOLID STATE BATTERY GUARDS with Lifetime Warranty
The PowerTector Battery Guard is a solid-state battery device that will monitor the source voltage and disconnect the equipment from the battery if the voltage falls below a pre-determined level. This can work to ensure that there is always sufficient voltage remaining in the battery to start a vehicle engine or ensure power is available for other critical applications. The total discharge of a lead-acid battery can also cause damage to the cells significantly shortening the life of the battery. The PowerTector unit can also be set to disconnect equipment at a lower voltage that will still protect the battery from total discharge while allowing for maximum battery usage. A timed version is also available which will disconnect automatically a set period after the ignition has been switched off.
A WIDE RANGE OF FEATURES
There are six units in the range from 10A to 200A. The 10A and 20A unit offer a simple inline system, usually wired to a specific piece of equipment.
These units do not require chassis mounting and simply connect and tie wrap neatly within the wiring system.
The 40A and 60A units are connected by M6 brass bolts, the 100A and 200A by M10 brass bolts and use a three-point mounting system to avoid rocking or stress to the electronics when mounted on uneven surfaces. Heat is dissipated into our custom manufactured die-cast casing and all units will operate at full power without additional heatsink dissipation.