Battery Chargers
Modern intelligent switch-mode chargers are all of the following descriptions. Maintenance chargers, bulk chargers, boost chargers, equalising charger, float chargers. Multi-mode chargers. Don't be confused we can help. Start by finding out your batteries' Ah (Amp hour) capacity, divide that number by 10 and it will give you an idea of the Amps size/capacity charger you need to charge your batteries. We are factory-approved importers of CTEK, Victron, Traction, Sterling Power & Delta Q.
- Description
- Specifications
- Post a comment
Peace of mind in a Panel
With 1.5 metres of cable, you can further extend access to the battery. The panel can be flush mounted allowing view of the L.E.D. indicators which indicate the batteries voltage. Above 12.65 (Green), between 12.65V and 12.41V (Orange) or below 12.4V being (Red).
With M8 eyelets you can easily connect onto marine batteries with additional posts or on large AGM batteries with bolt-in posts.
Also available in a 3.3 metre cable.
- Comes in two cable lengths with M8 8.4mm eyelet terminals
150cm cable length (part no. 56-380)
330cm cable length (part no. 56-531) - Size of connector/indicator: 5mm x 21mm x 50mm
- 15A fuse
Technical information
Warranty; 2 years
Model Number; 56-380
A chargers purpose
When you are choosing your next car, you carefully consider what you will use it for most. Be that a Micro car or an SUV the engines might be of similar power but the purpose, its intended use is of great importance.
With your charger the usage/environment, for example, in a marine environment, you use a sealed IP44 or better (higher numbers are better) rating. Maybe its internally mounted but still in a sea spray zone so conformity coated board or potted components for a fully sealed solution are ideal. Consideration for what if the power supply doesn't de-rate in hot conditions (internally via thermal control or an external sensor to monitor the battery temperature). That the energy efficiency is a high percentage to reduce heat and chance of failure and if you travel internationally with your charger that it's rated for 110VAC input and 230VAC input (universal power supply). Accessory items are available if required and technical support is available from the place of purchase.